Join Communities

Search Notes Gallery

Home / B.Pharm 1st Semester Notes / Introduction to Pharmacognosy Unit 4 Notes – Plant Metabolites and Traditional Systems of Medicine

Introduction to Pharmacognosy Unit 4 Notes – Plant Metabolites and Traditional Systems of Medicine

NotesGallery
Nov 19, 2026 • 42 min read
Introduction To Pharmacognosy Source: NotesGallery

Course Code: BP105T

Unit IV Overview

Introduction to Metabolites of Plant Origin and Traditional Systems of Medicine. Plants produce substances needed for growth and substances involved in defence and environmental interaction. These constituents provide medicines, excipients and analytical markers. Traditional medical systems organise the use of natural materials through their own principles and dosage forms.

Topics Covered – Syllabus Coverage

Required topic Coverage
Definition and general properties of plant metabolites 4.1-4.2
Carbohydrates, proteins and lipids 4.3-4.5
Alkaloids and glycosides 4.6-4.7
Flavonoids and tannins 4.8-4.9
Terpenoids and volatile oils 4.10-4.11
Resins; extraction and identification 4.12-4.13
Traditional medicine: basic concepts 4.14
Ayurveda principles and dosage forms 4.15-4.18
Yoga, Naturopathy and Unani 4.19-4.20
Siddha, Sowa-Rigpa and Homoeopathy 4.21-4.23
TCM principles and dosage forms 4.24-4.25
Role of pharmacognosy; quality and evidence 4.26-4.27
Revision and examination practice 4.28

Learning outcomes

  • Distinguish primary and secondary metabolites without treating secondary compounds as waste.
  • Describe the properties, examples and pharmaceutical importance of every listed metabolite class.
  • Explain chemical-class overlap, extraction principles and identification tests.
  • Outline the basic treatment principles of AYUSH systems and TCM.
  • Compare powders, extracts, decoctions, infusions, fermented liquids, pills and topical forms.
  • Explain the role of pharmacognosy in conventional and traditional medicines.

Essential terms

Term Meaning
Metabolite Substance involved in or produced through metabolism
Phytochemical Chemical constituent associated with plants
Aglycone Non-sugar portion of a glycoside
Glycone Sugar portion of a glycoside
Decoction Aqueous preparation obtained by controlled boiling
Infusion Extraction by steeping rather than sustained boiling
Standardisation Maintaining defined identity, composition and quality

The guiding question

How do the chemical properties of a plant constituent influence its extraction, dosage form, stability and medicinal use?

4.1 Plant metabolites: definition and general properties

Metabolism is the network of chemical reactions that sustains life. Metabolites are substances formed, transformed or used within this network.

Plant metabolites include sugars, amino acids, fatty acids and specialised compounds such as alkaloids, phenolics and terpenoids.

Pharmacognosy studies natural medicinal materials, their identity, constituents, quality and applications.

Production and distribution

Enzymes control biosynthetic reactions. Constituents may be produced in one tissue, transported and stored in another.

Vacuoles, glandular hairs, oil cavities, resin ducts and other structures can store particular compounds.

A leaf, root and seed from the same plant need not have the same composition or medicinal suitability.

General properties

  • Chemical diversity: constituents differ in functional groups, size, charge and stereochemistry.
  • Variable solubility: sugars often favour water; neutral lipid-like substances favour less-polar solvents. Individual compounds may be exceptions.
  • Uneven distribution: species, organ, age and environmental conditions influence content.
  • Variable stability: light, heat, oxygen, moisture and enzymes can alter constituents.
  • Biological activity: some substances are pharmacologically useful, others inactive at relevant exposure or toxic.

Pharmaceutical significance

Plant materials can supply active compounds, complex preparations and excipients.

A constituent may help identify a drug without being its therapeutic component.

The same chemical class may contain compounds with very different effects. Saying that a plant contains an alkaloid or flavonoid does not establish its clinical effectiveness.

Important distinction

A crude drug is a natural material used in a relatively unrefined form.

An extract is a preparation obtained by transferring constituents into a solvent and processing the resulting solution.

An isolated compound is a chemically defined substance.

These are not interchangeable merely because they originate from the same plant.

4.2 Primary and secondary metabolites

Primary metabolites participate directly in fundamental growth, energy metabolism, maintenance and reproduction.

Secondary metabolites, also called specialised metabolites, often contribute to defence, signalling, attraction and adaptation.

Their distribution is generally more restricted, but they can be essential to ecological fitness.

Primary metabolites Secondary/specialised metabolites
Closely linked to central metabolism Often linked to specialised ecological functions
Broadly distributed in living organisms Distribution may be limited to particular groups
Sugars, amino acids, proteins and many lipids Alkaloids, many phenolics and specialised terpenoids
Supply energy, structure and basic cellular functions Support defence, communication and environmental responses
Provide precursors for specialised pathways Formed using products of central metabolism

The relationship is continuous

Photosynthesis supplies carbon that enters central metabolic pathways. These pathways provide substrates for specialised biosynthesis.

Amino acids can contribute to alkaloids; acetyl-derived and isoprenoid pathways contribute to other classes.

Secondary compounds are not created independently of primary metabolism.

Avoid rigid classification

Chemical class and metabolic role are different classification systems.

Some terpenoids participate in essential cellular functions, while others are specialised defence compounds.

Glycosides can contain several different aglycone classes.

Lipids include central structural substances as well as specialised derivatives.

Use the context and example rather than a rule that every member of a class has one role.

Ecological functions

Pigments can attract pollinators; bitter or toxic substances discourage herbivores; volatile compounds participate in signalling; protective phenolics can help plants respond to environmental stress.

Human medicinal use is a separate question requiring evidence about dose, preparation and effect.

Remember: Primary means central metabolic role, not medicinal importance. Secondary means specialised role, not useless by-product.

4.3 Carbohydrates

Carbohydrates include sugars and their related compounds, including polysaccharides.

Many contain multiple hydroxyl groups and a carbonyl group or a unit derived from one.

The expression Cn(H2O)n describes some simple sugars, but it is not a universal definition for all carbohydrates.

Classification

Monosaccharides are single sugar units, such as glucose and fructose.

Oligosaccharides contain a small number of linked units; disaccharides include sucrose and maltose.

Polysaccharides contain many units, such as starch and cellulose.

The linkage and arrangement of units strongly influence their properties.

Open-chain D-glucose in a Fischer projection. The hydroxyl sequence from C2 to C5 is right, left, right, right. The projection represents stereochemistry, not the dominant cyclic form in aqueous solution.

Diagram labels: D-glucose, C6H12O6; aldehyde group; C5 hydroxyl; CH2OH. Horizontal bonds project towards the viewer; vertical bonds project away.

Important plant examples

Starch stores carbohydrate in plants. It contains amylose, mainly with alpha-(1→4) links, and amylopectin, which also has alpha-(1→6) branch points.

Cellulose has beta-(1→4)-linked glucose units and forms a major structural component of cell walls.

Gums and mucilages are heterogeneous hydrophilic polysaccharide materials; they are not all chemically identical.

Starch grains with concentric lamellae and a hilum are shown as diagnostic microscopic structures. Grain size, shape and hilum position vary with botanical source; the sketch is not a species-specific standard.

Diagram labels: Hilum; lamellae; grain boundary. Different sizes and shapes require a scale.

Properties

Many simple sugars dissolve readily in water and may taste sweet.

Polysaccharides can dissolve, swell, disperse or remain insoluble depending on structure.

Starch granules swell and gelatinise under suitable heating in water.

Cellulose is not converted into a simple aqueous solution by ordinary steeping.

Branching and intermolecular interactions affect behaviour.

Identification principles

Molisch reaction is a broad carbohydrate screening reaction.

Suitable reducing-sugar tests, such as Benedict or Fehling methods, depend on reducing behaviour and conditions.

Sucrose is non-reducing before hydrolysis; glucose is reducing.

Iodine gives a characteristic colour with suitable starch structures but is not a universal test for every carbohydrate.

Pharmaceutical importance

Starch can serve as a diluent, binder or disintegrant, depending on grade and formulation.

Acacia and other appropriate gums can stabilise dispersions or act as binders.

Mucilaginous drugs such as isabgol take up water and have relevant bulk-forming properties.

Cellulose derivatives have distinct formulation uses; their properties must be stated for the particular derivative.

Quality concerns

Moisture, microbial contamination, particle size and viscosity or swelling behaviour affect carbohydrate-rich materials.

Sugar addition can inflate extractive values in an adulterated drug.

A carbohydrate-positive test alone cannot establish the botanical source.

4.4 Proteins and amino acids

Amino acids contain amino and carboxyl functions; their side chains give them different properties.

Proteins are chains of amino-acid residues joined by peptide bonds and organised into specific structures.

Plant proteins function as enzymes, transporters, structural components and storage materials.

A general dipeptide contains an amide link between amino-acid residues. R1 and R2 represent side chains; the highlighted C(=O)-NH unit is the peptide linkage.

Diagram labels: R1 and R2 side chains; peptide linkage C(=O)-NH. Hydrolysis cleaves susceptible peptide bonds.

Protein structure

  • Primary structure: the amino-acid sequence.
  • Secondary structure: local arrangements such as alpha helices and beta sheets.
  • Tertiary structure: the overall folding of one chain.
  • Quaternary structure: the association of multiple chains when present.

A protein does not necessarily have all four levels.

Properties and denaturation

Solubility varies with pH, ionic strength, composition and structure.

Heat, extreme pH or suitable chemicals can cause denaturation, changing the folded structure and often its function.

Denaturation is different from complete peptide-bond hydrolysis.

Proteolysis cleaves chains into smaller peptides or amino acids.

Identification

The Biuret reaction detects suitable peptide-bond-containing materials under its conditions.

Ninhydrin is useful for free amino groups and amino-acid analysis, with response differences among compounds.

A positive reaction does not identify one particular protein or establish its enzyme activity.

Pharmacognostic examples

Papain preparations from papaya and bromelain preparations associated with pineapple contain proteolytic enzymes.

Their identity, activity and stability must be controlled.

Protein-containing material can also be toxic: natural origin and protein chemistry do not imply safety.

Formulation and handling

Enzymes may lose activity during unsuitable heating, drying or storage.

An activity assay can provide information that a total-protein measurement does not.

Avoid assuming that a protein remaining chemically present is still functionally active.

Match the manufacturing and storage conditions to the preparation.

Comparison with carbohydrates

Both are central biological materials, but proteins contain amino-acid sequences and peptide bonds, while polysaccharides contain sugar units and glycosidic links.

Their diagnostic reactions and degradation products differ.

A mixed crude drug may contain both, so tests must be interpreted in context.

4.5 Lipids, fixed oils, fats and waxes

Lipids are a chemically diverse group of generally hydrophobic or amphiphilic substances.

They include triacylglycerols, phospholipids, waxes and sterols.

Many fixed oils and fats consist largely of triacylglycerols, in which glycerol is esterified with three fatty acids.

A general triacylglycerol: glycerol is esterified with three fatty-acid groups. R1, R2 and R3 are hydrocarbon-chain residues, not three additional glycerol molecules.

Diagram labels: Glycerol backbone; fatty-acid residues R1, R2 and R3; three ester links. Ester group: -O-C(=O)-.

Fixed oils and fats

They generally do not evaporate readily under ordinary conditions and leave a persistent greasy mark.

The terms oil and fat often distinguish liquid and solid states at a stated temperature.

Fatty-acid composition affects melting behaviour, oxidation and other properties.

Castor oil is a plant fixed oil; cocoa butter is a plant fat.

Waxes and phospholipids

Waxes commonly contain esters of long-chain fatty acids and long-chain alcohols and can form protective plant coatings.

Phospholipids have polar and non-polar regions and are important membrane components.

They are not simply another name for edible triglyceride oils.

Reactions and deterioration

Hydrolysis releases fatty acids and glycerol from suitable triglycerides.

Saponification with alkali produces glycerol and fatty-acid salts.

Unsaturated lipids are susceptible to oxidation.

Hydrolytic and oxidative rancidity are different processes, although both can occur in a material.

Quality parameters

Acid value reflects free acidity; saponification value measures alkali consumption by free acids and saponifiable esters.

Peroxide-related tests assess particular oxidation products.

Refractive index, relative density and composition can support identification.

No single constant gives a complete account of oil quality.

Pharmaceutical importance

Appropriate oils can serve as vehicles or ingredients; fats and waxes contribute to ointment and suppository bases.

Plant sterols and related compounds also have chemical and research importance.

A formulation function does not establish suitability for every route: purity, stability and the intended use must be considered.

Storage

Control exposure to heat, air and light, use suitable containers and check deterioration.

An oil that still looks clear can have changed chemically.

Volatile oils, discussed later, have a substantially different composition and distillation behaviour.

4.6 Alkaloids

Alkaloids are a diverse group of naturally occurring nitrogen-containing compounds, many of which show basic behaviour and marked biological activity.

They are often derived from amino-acid-related pathways, but their structures and biosynthetic origins vary.

Not every nitrogen-containing plant molecule is classified as an alkaloid.

General properties

Many free-base alkaloids are less soluble in water than their salts, while acid treatment can form water-soluble salts.

This is a useful extraction principle, not an absolute rule.

Quaternary compounds and weakly basic or non-basic members behave differently.

Some alkaloids are solids; others, such as nicotine, are liquids under ordinary conditions.

Broad classification

True alkaloids are traditionally described as amino-acid-derived with nitrogen in a heterocyclic ring.

Protoalkaloids are amino-acid-derived but have nitrogen outside such a ring.

Pseudoalkaloids are grouped as alkaloids although their main skeleton is not directly derived from an amino acid.

Structural groupings include tropane, indole, isoquinoline and purine classes.

Acid-base handling of a suitable alkaloid: protonation changes B to BH+. After appropriate basification, neutral B can partition into an immiscible organic phase. The drawn organic layer is less dense than water.

Diagram labels: B + H+ reversibly forms BH+; free base and conjugate acid; organic phase; aqueous phase; stopcock. Neutral B is shown after suitable basification and partition.

Example Chemical/medicinal significance
Morphine An opioid alkaloid used in controlled conventional medicines
Atropine A tropane alkaloid with antimuscarinic action
Quinine An alkaloid associated with Cinchona; an antimalarial drug example
Caffeine A purine alkaloid; weak basicity illustrates an exception to simple rules
Vincristine An alkaloid used in specialist cancer treatment

Identification and extraction

Mayer, Dragendorff and related reagents can produce precipitates with suitable alkaloids.

Interference and incomplete extraction can mislead; confirm with selective methods such as chromatography.

In a suitable acid-base extraction, protonate the compound, separate interfering material, then adjust pH to recover the free base in an appropriate phase.

Importance and limitations

Alkaloids can be potent at low exposure and may have narrow therapeutic margins.

Their presence explains neither a universal use nor safety of a crude drug.

Chemically defined medicines are controlled by identity, purity, dose and clinical evidence; an unstandardised plant material is not equivalent.

4.7 Glycosides

Glycosides contain a sugar portion, the glycone, linked through the sugar’s anomeric centre to another group, the aglycone or genin.

Cleavage can release the sugar and aglycone or products formed from them.

The sugar influences solubility, transport and biological behaviour; the aglycone often contributes substantially to the activity.

Hydrolysis of a susceptible O-glycoside breaks the sugar-aglycone linkage. The reaction is schematic; linkage, enzyme and conditions determine whether a particular glycoside is cleaved.

Diagram labels: Glycosidic link; aglycone group; glycosyl-O-R plus H2O; suitable acid or enzyme; sugar plus R-OH. R represents the non-sugar group.

Classification by linkage

  • O-glycosides: link through oxygen.
  • N-glycosides: link through nitrogen.
  • S-glycosides: link through sulfur.
  • C-glycosides: have a carbon-carbon link and are often more resistant to ordinary hydrolysis.

It is incorrect to assume that every glycoside cleaves under one mild condition.

Classification by aglycone or effect

Group Examples or distinguishing feature
Cardiac glycosides Steroid-related aglycone and characteristic lactone; digoxin is a drug example
Anthraquinone-related glycosides Senna constituents such as sennosides
Saponin glycosides Steroidal or triterpenoid aglycones; surface-active behaviour in many members
Phenolic glycosides Phenolic aglycones, for example salicin
Cyanogenic glycosides Can generate hydrogen cyanide after appropriate breakdown; important toxicity concern
Flavonoid glycosides Flavonoid aglycones with attached sugars, such as rutin

Hydrolysis and storage

Acids or suitable enzymes may cleave susceptible links.

Plant damage and moisture can bring enzymes and substrates together.

Drying, processing and storage therefore influence the observed composition.

The aglycone may undergo further change, so analysis should distinguish original constituents from degradation products.

Tests and significance

Select tests for the intended group, rather than using one universal glycoside reaction.

Anthraquinone-related procedures and cardiac-glycoside reactions target particular structural features and require appropriate preparation.

Chromatographic identification and assay offer more selective evidence.

Foam suggests surface activity but is not a definitive saponin identification.

Chemical-class overlap

A flavonoid glycoside belongs to both glycoside and flavonoid categories.

A saponin can also belong to a terpenoid-derived family.

These labels describe different structural aspects; they are not mutually exclusive boxes.

4.8 Flavonoids

Flavonoids are a large family of phenolic compounds commonly described by a C6-C3-C6 carbon framework.

Many contain two aromatic rings associated with a central oxygen-containing ring.

Subgroups differ in oxidation, saturation and ring substitution. Some related subclasses arrange the rings differently.

Flavone skeleton with aromatic rings A and B and an oxygen-containing ring C. The C4 carbonyl and C2-C3 double bond distinguish this subgroup; other flavonoid subclasses differ.

Diagram labels: Ring A; ring B; oxygen-containing ring C; C4 carbonyl; C2-C3 double bond in ring C.

Major subgroups

Flavones and flavonols have a characteristic oxidised central ring; flavonols also carry a hydroxyl group at a defining position.

Flavanones have a more saturated central ring.

Flavan-3-ols, anthocyanins and isoflavonoids have distinct structural features.

Avoid using the structure of one subgroup as the complete structure of every flavonoid.

Examples

Quercetin is a flavonol.

Rutin is a glycoside of quercetin.

Catechin belongs to the flavan-3-ol group.

Anthocyanins contribute red, purple and blue colours to many plant tissues, with colour influenced by the chemical environment.

Flavonoids may occur as aglycones or glycosides.

Properties and plant functions

Phenolic hydroxyl groups can affect reactivity and solubility.

Glycosylation can alter water affinity and distribution.

Flavonoids participate in pigmentation, signalling and responses to environmental stress.

Their measured antioxidant activity in a chemical assay does not automatically prove a therapeutic antioxidant effect in humans.

Identification

Appropriate colour reactions, UV behaviour and chromatography can support identification.

Aluminium-chloride-based measurements depend on the compounds and calibration used; responses are not identical across the class.

A total-flavonoid estimate expressed as a reference equivalent is different from the actual mass of every flavonoid in the sample.

Pharmaceutical relevance

Flavonoids can serve as analytical markers and contribute to the profile of herbal preparations.

Selected compounds and preparations are researched for specific effects.

Bioavailability, metabolism, dose and product composition determine whether laboratory findings translate into useful clinical outcomes.

4.9 Tannins

Tannins are polyphenolic substances capable, under suitable conditions, of binding proteins and other macromolecules.

Their traditional association with leather tanning and their astringent effect help distinguish them from the broad group of simple phenolics.

Not every phenolic compound is a tannin.

Hydrolysable tannins

These commonly contain a central sugar or related core esterified with phenolic acids.

Gallotannins yield gallic-acid-related products on hydrolysis.

Ellagitannins yield products that can form ellagic acid.

The products depend on the structure and conditions; a single formula does not represent the entire group.

Condensed tannins

Also called proanthocyanidins, these contain linked flavan-derived units.

Their major interunit links are not ordinary sugar-phenolic ester bonds, so they do not behave like hydrolysable tannins in simple hydrolysis.

Some analytical treatments generate coloured anthocyanidin-related products.

Properties and identification

Tannin-rich extracts can be astringent and may interact with proteins, gelatin or other suitable reagents.

Ferric-chloride colour is a useful phenolic screening observation but not an exclusive tannin test.

Protein-binding or selective analytical procedures provide more appropriate evidence for particular tannin questions.

Illustrative protein-precipitation test: a suitable tannin preparation produces an insoluble complex under defined conditions. A reagent blank and a suitable comparison are needed to interpret precipitation.

Diagram labels: Protein plus blank; protein plus extract; insoluble complex. Conditions and controls determine interpretation.

Examples and importance

Galls and some barks are tannin-rich natural materials.

Tannins affect taste, interactions and extract behaviour and may be relevant to particular traditional uses or analytical specifications.

They can also interfere with enzymes or analysis by binding proteins.

High content does not establish a universal therapeutic advantage.

Quality and storage

Oxidation and other transformations can change colour, solubility and binding behaviour.

Extraction conditions affect the fraction recovered.

Report whether a method measures a defined compound, a protein-binding fraction or a reference-equivalent total; these are different results.

Compare the two major groups

Hydrolysable Condensed
Often ester-linked phenolic groups around a core Linked flavan-derived units
Can yield gallic/ellagic-related products Proanthocyanidin chemistry
Susceptible to appropriate hydrolysis Not cleaved like simple phenolic esters
Structure varies within the group Chain length and linkages vary

4.10 Terpenes and terpenoids

Terpenes are hydrocarbons associated with isoprenoid biosynthesis.

Terpenoids include related compounds modified by oxidation or other changes.

Their carbon skeletons are commonly interpreted through five-carbon units.

The formula (C5H8)n is useful for many terpene hydrocarbons, not every oxygenated or rearranged terpenoid.

Biosynthetic building blocks

The immediate activated five-carbon units are IPP and DMAPP, formed through plant isoprenoid pathways.

Free isoprene is a structural teaching reference, not the direct substrate from which all plant terpenoids are simply polymerised.

Rearrangements, cyclisation and oxidation create diversity.

Class Typical carbon count and example
Hemiterpene C5; isoprene-related compounds
Monoterpene C10; limonene; menthol is an oxygenated monoterpenoid
Sesquiterpene C15; many essential-oil constituents; artemisinin is a sesquiterpenoid
Diterpene C20; taxane-related constituents belong to this broad biosynthetic group
Triterpene C30; squalene and many triterpenoid families
Tetraterpene C40; carotenoids

Biological roles

Terpenoid-related chemistry contributes to pigments, hormones, membrane-associated substances and specialised defence compounds.

Many smaller terpenes occur in volatile oils, while larger members are much less volatile.

A compound’s terpene class alone does not establish its smell or distillation behaviour.

Worked carbon-count example

Four five-carbon building units correspond to a typical C20 diterpene skeleton; six correspond to C30 triterpenes.

These are carbon-framework classifications, not a promise that every final derivative retains a simple unmodified formula.

Subsequent biosynthesis may remove or modify parts of the skeleton.

Pharmaceutical relevance

Selected terpenoids are active drugs or starting materials for drug development.

Others provide flavour, fragrance or formulation functions.

Distinguish a purified active substance from a whole oil or plant extract containing many related compounds.

4.11 Volatile oils: properties, extraction and storage

Volatile oils, also called essential oils, are complex mixtures of substances that evaporate appreciably and contribute characteristic odours.

Many constituents are terpenes or terpenoids, but some oils contain important phenylpropanoid compounds.

Clove oil, for example, is associated with eugenol; essential oil is not synonymous with terpene hydrocarbon.

Peltate glandular trichome, shown in enlarged side section and head surface view. Secretory cells beneath the cuticle produce material stored in a subcuticular space; the number and arrangement of cells depend on the species.

Diagram labels: Cuticle; stored secretion; secretory cells; stalk cell; head surface view. Enlarged side section above and surface view below.

General properties

They are usually poorly miscible with water but dissolve in suitable organic solvents.

Many are liquids, though individual constituents can crystallise.

Density and optical rotation vary; not all oils float on water.

Their composition depends on botanical source, plant part, harvest and processing.

Extraction methods

Hydrodistillation heats plant material with water.

Steam distillation passes steam through suitable material and condenses the carried vapour.

Expression is useful for some citrus peel oils.

Solvent extraction may produce a different aromatic preparation with additional non-volatile constituents.

Select a method appropriate to the material and required product.

Hydrodistillation apparatus: vapour travels from the heated plant-water mixture through the inner condenser tube to a receiver. Cooling water fills a separate jacket. The illustrated recovered oil is lighter than the aqueous layer.

Diagram labels: Vapour tube; water out; water in; plant and water; electric heater; oil layer. Cooling jacket surrounds the inner vapour tube.

Apparatus and separation

The vapour route must connect the heating vessel to the condenser and receiver.

Cooling water enters the lower jacket port and leaves the upper port in the illustrated condenser, helping keep the jacket filled.

Vapour condenses in the inner tube.

The recovered liquid may form oil and aqueous layers; their order depends on density.

Volatile versus fixed oil

Volatile oil Fixed oil
Mainly volatile aromatic constituents Commonly largely triglycerides
Can often be recovered by appropriate distillation Does not distil with steam like an essential oil
Usually lacks a persistent triglyceride-like grease stain Leaves a persistent greasy stain
Not ordinarily characterised by triglyceride saponification Saponification is a key reaction

Quality and stability

Authenticate source and check the chemical profile, suitable physical constants and relevant impurities.

Oxidation and loss of volatile constituents alter quality.

Store in compatible, well-closed containers protected from excessive light, air and heat.

A pleasant odour alone cannot establish identity, purity or suitability for an intended route.

4.12 Resins and related mixtures

Resins are complex, usually non-volatile plant products containing mixtures of compounds such as resin acids, alcohols, esters and related substances.

They are commonly amorphous and poorly soluble in water, while solubility in organic solvents depends on composition.

They can occur in ducts or as exudates and may harden after release.

Related preparations

Oleoresins contain resinous material with volatile-oil constituents.

Gum-resins contain gum and resin fractions.

Oleo-gum-resins contain all three components.

Balsams are resinous products characteristically associated with benzoic/cinnamic acids or related esters.

These names describe composition and are not interchangeable.

Resin duct in transverse section. Secretory epithelial cells surround the lumen within plant tissue. The surrounding cells and duct arrangement must be interpreted with the authentic plant material.

Diagram labels: Epithelial cell; duct lumen; surrounding tissue. Secretion occupies the central duct space.

Material Category used in pharmacognosy
Colophony Resin obtained as a non-volatile fraction of pine-related material
Benzoin Balsamic resin
Asafoetida Oleo-gum-resin
Myrrh Oleo-gum-resin
Turpentine-related exudate Oleoresin before separation into fractions

Properties and uses

Some resins soften on warming and form films in suitable preparations.

Uses can include adhesive, protective, aromatic or pharmaceutical functions for particular materials.

Their effects and safety differ with constituents.

Resin is a physical/compositional category, not one uniform therapeutic class.

Quality evaluation

Examine identity, foreign material, solubility fractions and appropriate chemical characteristics.

Adulteration can involve cheaper resins or added insoluble material.

Aging, volatile loss and oxidation can change the product.

Sampling should account for heterogeneous lumps and surface contamination.

Distinction from gums

Gums are hydrophilic polysaccharide-rich substances that swell or disperse in water; resins generally favour suitable organic solvents.

In a gum-resin, the fractions behave differently during separation.

Testing the entire mixture as though it were a pure gum or pure resin can lead to incorrect conclusions.

4.13 Extraction, reactions and identification: an integrated view

Extraction transfers constituents from a material to a chosen solvent.

Polarity, ionisation, particle size, time, temperature and chemical stability determine the result.

A hotter or stronger extraction is not automatically better because it can also degrade useful constituents or recover more unwanted material.

Selecting a method

Water often extracts many polar sugars and polymeric materials.

Hydroalcoholic systems can recover broader mixtures.

Less-polar solvents favour suitable neutral lipid-like substances.

Acid-base manipulation helps extract appropriate alkaloids.

Volatile oils need methods that retain or recover volatile constituents.

Actual solvent selection must follow the defined preparation and method.

Key reactions to remember

  • Peptide hydrolysis: a suitable peptide bond cleaves with water to form smaller peptide/amino-acid products.
  • Glycoside hydrolysis: a susceptible glycoside gives sugar and aglycone-related products.
  • Saponification: triglyceride + 3 equivalents of alkali gives glycerol + 3 fatty-acid salts.

These processes are chemically different.

Screening is not final identification

Class tests, colour and precipitation provide preliminary evidence.

Use authenticated reference material, blanks and suitable controls.

Confirm important results with selective separation and identity methods.

A crude drug can contain several classes and interferents; a single positive colour cannot establish its complete composition.

Yield calculation: hypothetical example

Extraction of 20.0 g of dry material yields 3.0 g of dried extract.

Extraction yield = dried extract mass × 100/dry starting-material mass

Extraction yield = 3.0 × 100/20.0 = 15.0%

This is a process yield, not the percentage of one active substance.

A different solvent may give a different yield and profile.

Marker yield: hypothetical example

If that 3.0 g extract contains 2.0% of a measured marker:

Marker recovered = 3.0 × 0.020 = 0.060 g

Marker recovery relative to starting material = 0.060 × 100/20.0 = 0.30%

A larger crude-extract yield can still have a lower marker concentration.

Manufacturing implication

Keep material identity, solvent ratio, extraction conditions, concentration and storage defined.

Check stability and composition after processing.

The preparation’s name and visible form alone cannot guarantee that two batches contain the same constituents.

4.14 Traditional medicine: systems, principles and terminology

Traditional systems of medicine are organised approaches to health and illness developed within particular cultural and historical settings.

They combine theories of the body, diagnosis, prevention, treatment and medicinal preparations.

The syllabus requires understanding these theories as theories of their systems, not translating every term into a modern molecule or organ.

AYUSH and TCM

AYUSH encompasses Ayurveda, Yoga and Naturopathy, Unani, Siddha and Homoeopathy; Sowa-Rigpa is also included in India’s AYUSH framework.

Traditional Chinese Medicine (TCM) is a separate tradition associated with China and includes medicinal and non-medicinal approaches.

These systems have distinct concepts even when they use some similar plant materials.

Basic treatment themes

Many traditional approaches emphasise constitution or pattern, diet, lifestyle and selection of an individualised preparation.

The names of their balancing concepts differ.

A traditional explanation and a modern pharmacological mechanism are different kinds of description; neither should be substituted for the other without evidence.

Conventional medicine and integration

Conventional medicine uses biomedical diagnosis and evidence about interventions; the syllabus also uses the term allopathy.

Complementary use means use alongside conventional care.

Alternative use means use in its place.

Integrative care coordinates suitable approaches with attention to evidence, safety and communication.

Formulation vocabulary

  • Single-drug preparation: one defined medicinal material.
  • Compound formulation: several defined ingredients.
  • Dosage form: the physical presentation, such as powder, liquid or pill.
  • Route: how it is administered.

A tablet shape alone does not establish composition, dose or effectiveness.

Reading traditional concepts correctly: Describe what a system teaches, then distinguish the product’s measurable composition and the evidence for a particular clinical use. Institutional recognition is not proof of every claim made within a system.

4.15 Ayurveda: basic principles

Ayurveda is an Indian medical tradition concerned with maintenance of health and management of disease.

Its conceptual framework includes Panchamahabhuta, the five elements, and Tridosha, the three doshas.

These are traditional explanatory categories rather than five chemical elements or three anatomically isolated fluids.

Panchamahabhuta

The five categories are:

  • Prithvi: earth.
  • Ap/Jala: water.
  • Tejas/Agni: fire.
  • Vayu: air.
  • Akasha: space.

They describe qualities within the traditional framework. They should not be drawn as literal particles circulating inside the body.

Tridosha

Vata is associated with movement and related functions.

Pitta is associated with transformation and heat.

Kapha is associated with cohesion, support and related qualities.

Health and illness are interpreted partly through their balance and disturbance.

This does not make Vata identical to nerves, Pitta identical to enzymes or Kapha identical to mucus.

Other important terms

Prakriti refers to constitution; Vikriti to the current disturbed state.

Dhatu refers to tissue categories; Mala to waste products in the framework; Agni to transformative/digestive principles.

Classical tissue categories include rasa, rakta, mamsa, meda, asthi, majja and shukra.

Their traditional meanings should not be equated automatically with modern tissue classifications.

Assessment and treatment orientation

Traditional assessment considers the patient’s condition, constitution, diet, lifestyle and signs interpreted within the system.

Treatment may combine dietary measures, routine, medicines and procedures.

The selected intervention depends on the practitioner and formulation; the framework is not a universal self-treatment recipe.

Pharmacognostic relevance

Many Ayurvedic formulations use plant drugs, but ingredients can also include animal or mineral materials.

Pharmacognosy establishes botanical identity, medicinal part, constituents, purity and processing effects.

It does not replace the clinical assessment or prove all traditional indications.

4.16 Ayurvedic drug properties and treatment approaches

Describing a drug within the system

Rasa is taste.

Guna describes qualities.

Virya refers to a traditional potency concept.

Vipaka refers to a post-digestive effect category.

Prabhava describes a specific action not adequately explained by the other categories within that framework.

These terms organise traditional selection, not a modern receptor assay.

Six tastes

  • Madhura: sweet.
  • Amla: sour.
  • Lavana: salty.
  • Katu: pungent.
  • Tikta: bitter.
  • Kashaya: astringent.

These form the common six-taste classification.

Sensory classification must be distinguished from chemical identity: bitterness does not identify one alkaloid, and astringency does not quantify tannins.

Main treatment approaches

Shamana aims to pacify or manage the disturbed state using appropriate diet, routine and medicines.

Shodhana refers to eliminative or purification approaches in traditional practice.

Rasayana concerns traditional rejuvenative/health-maintenance aims.

These descriptions are not evidence that a product universally removes toxins or reverses ageing.

Panchakarma: overview

Common teaching lists include Vamana, Virechana, Basti, Nasya and Raktamokshana, while classical grouping varies, including classifications that count types of Basti separately.

They denote specialised procedures such as emesis, purgation, enema-related treatment, nasal administration and bloodletting-related practice.

Explain the categories without giving unsupervised procedure instructions.

Diet and lifestyle

Pathya refers to suitable measures and Apathya to unsuitable ones within the prescribed regimen.

Individualisation may consider food, activity and daily or seasonal routine.

Nutritional suitability and drug-food interactions still need assessment; a traditional recommendation is not automatically appropriate for every patient.

Pharmaceutical lesson

Traditional descriptors help interpret the intended formulation, while analytical tests verify what it contains.

Correct botanical identity, controlled processing and reproducible quality are necessary regardless of the conceptual system used to prescribe it.

4.17 Ayurvedic dosage forms: basic aqueous preparations

The five basic extraction/preparation forms often taught as Panchavidha Kashaya Kalpana are Swarasa, Kalka, Kwatha, Hima and Phanta.

They differ in how the material is processed and exposed to liquid and heat.

Exact ratios and timing are formulation-specific.

Form Essential preparation principle
Swarasa Expressed juice from suitable fresh material
Kalka Paste obtained by grinding suitable material
Kwatha/Kashaya Decoction made by controlled boiling in water
Hima Cold aqueous infusion/steeping
Phanta Hot infusion using steeping rather than sustained boiling

Kwatha: stepwise principle

  • Step 1: authenticate and prepare the specified coarse material.
  • Step 2: add the defined water quantity.
  • Step 3: boil under controlled conditions to the required endpoint.
  • Step 4: filter as prescribed.
  • Step 5: check the resulting preparation and use or store within its defined instructions.

Do not apply one reduction ratio to every formula.

Hima and Phanta comparison

Hima uses cold or room-temperature extraction under defined conditions.

Phanta uses hot liquid and a specified steeping period.

They can extract different profiles from the same plant because temperature and time change solubility and stability.

Neither should be assumed equivalent to a prolonged decoction.

Decoction preparation uses weighed coarse material, controlled aqueous heating and filtration. The heated vessel is open; vapour escapes above it. Exact quantities and concentration endpoints follow the particular formula.

Diagram labels: Water vapour; filter paper; coarse drug; filtrate; controlled decoction; filter as specified. Do not assume one universal reduction ratio.

Swarasa and Kalka

Fresh juice retains a different mixture from a dried-powder extract.

Grinding to a paste can release constituents but also exposes material to enzymes and contamination.

Define the plant part, fresh/dried state and method.

Suitable water and cleanliness are especially important for aqueous preparations.

Quality concerns

Water-rich forms can deteriorate readily.

Control identity, preparation conditions, microbial quality and storage.

A freshly prepared appearance does not prove freedom from contamination.

Dose and shelf life belong to the particular preparation’s instructions and cannot be inferred from the category alone.

4.18 Ayurvedic dosage forms: powders, fermented and compound forms

Churna and Vati/Gutika

Churna is a defined powder preparation, often made by separately preparing and sieving ingredients before controlled blending.

Particle size, moisture and blend uniformity matter.

Vati/Gutika are pill/tablet-like forms prepared according to a specified formula.

Their uniform appearance does not guarantee uniform constituent content.

Powder preparation: an authenticated dried material is reduced in a mortar, passed through a defined sieve and collected for controlled blending. Particle size and ingredient identity remain part of the specification.

Diagram labels: Pestle; defined sieve; reduce; sieve; collect and blend specified ingredients. Record size, moisture and batch identity.

Asava and Arishta

These are fermented liquid preparations in which controlled fermentation produces alcohol that can contribute to extraction and preservation.

In the commonly taught distinction, Arishta begins with a decoction-based preparation, while Asava generally uses juice or another suitable non-decocted liquid preparation.

The actual formula determines the details.

Fermentation requires defined ingredients, suitable conditions and monitored completion. It does not simply mean leaving a herbal liquid to spoil.

Check identity, composition, fermentation-related parameters and contamination.

Do not depict an actively gas-producing vessel as a rigid, fully sealed pressure container.

Avaleha/Lehya

Avaleha is a semisolid, often sweetened preparation made by controlled concentration and incorporation of defined ingredients.

Consistency, homogeneity and stability matter.

Its base and sugar content affect the product’s suitability; it is not equivalent to a simple aqueous extract.

Illustrative monitored fermentation vessel with a gas outlet and airlock. Gas escapes through the liquid seal; the vessel is not rigidly sealed against active gas production. This sketch illustrates process control rather than one universal traditional apparatus.

Diagram labels: Gas outlet; liquid seal; headspace; fermenting liquid. Active gas production needs pressure release.

Taila and Ghrita

Medicated oils and ghee-based preparations transfer suitable constituents into a lipid-containing base through a defined manufacturing method.

Lipid-compatible and water-associated constituents behave differently.

Control processing endpoints and avoid uncontrolled overheating or moisture remaining in the finished product.

Bhasma, Lepa and related forms

Bhasma denotes specially processed calcined preparations, often involving mineral or metal materials, within the tradition.

Lepa is an externally applied paste.

Arka is a distillate obtained by a defined process.

Processing names do not remove the need to establish composition, contaminants and safety.

Mineral/metal-containing products require particular analytical attention.

Useful comparison

Form Quality emphasis
Churna Identity, size, moisture, uniform blending
Vati/Gutika Composition and unit uniformity
Asava/Arishta Fermentation, alcohol-related composition and contamination
Avaleha Semisolid consistency, homogeneity and stability
Taila/Ghrita Lipid quality, processing and residual moisture
Arka Distillation identity and recovered volatile profile

4.19 Yoga and Naturopathy

Yoga: basic principles

Yoga combines physical, breathing, attentional and behavioural disciplines within its philosophical framework.

Asana refers to postural practice, Pranayama to regulated breathing practices and Dhyana to meditation.

These are practices rather than crude-drug dosage forms.

Eight-limb framework

The commonly taught sequence is:

  • Yama.
  • Niyama.
  • Asana.
  • Pranayama.
  • Pratyahara.
  • Dharana.
  • Dhyana.
  • Samadhi.

It spans conduct, observance, posture, breathing, sensory withdrawal, concentration, meditation and contemplative absorption.

A pharmacy answer should identify the terms and distinguish them from pharmacological substances.

Application and evidence

Specific yoga programmes may support selected health outcomes, but benefits depend on the programme, population and evidence.

Breathing or postural practices should not be equated with treatment of every disease.

Physical limitations and appropriate instruction affect suitability.

Naturopathy: basic orientation

Naturopathy emphasises diet, lifestyle and approaches intended to support the body’s capacity for health.

Practices can include exercise, rest and various water-, massage- or other physical approaches.

Traditions and clinical programmes vary; describing them does not establish a universal mechanism or benefit.

Role of natural materials

Some programmes may use food or botanical products, but Yoga and Naturopathy are not defined by one set of manufactured herbal dosage forms.

Where products are used, authentication, composition and quality remain necessary.

Natural, organic and chemical-free are not substitutes for analytical quality information.

Pharmacy distinction

Separate a practice, a product and a combined programme.

Evidence for a supervised exercise programme cannot be transferred automatically to a herbal supplement sold alongside it.

Communicate the actual intervention and intended use.

4.20 Unani medicine: principles, treatment and forms

Unani is a medical tradition with a Greco-Arab historical foundation.

Its concepts include Arkan (elements), Mizaj (temperament), Akhlat (humours), Aza (organs), Arwah, Quwa and Afal (functions).

These categories organise its interpretation of health and illness; they are not direct equivalents of modern biochemical entities.

Temperament and humours

The temperament framework uses hot/cold and moist/dry qualities.

The four humours are commonly named:

  • Dam: blood.
  • Balgham: phlegm.
  • Safra: yellow bile.
  • Sauda: black bile.

These are traditional categories.

In particular, black bile should not be drawn as a confirmed separate fluid in a modern anatomical organ.

Treatment principles

Ilaj-bil-Ghiza uses dietary management.

Ilaj-bil-Dawa uses medicines.

Ilaj-bil-Tadbir uses regimenal approaches.

Ilaj-bil-Yad refers to surgery-related treatment.

Aims include correcting the traditionally interpreted disturbed state through a suitable plan.

Describe the categories without treating their historic theory as an established chemical mechanism.

Essential factors

The traditional six essential factors address:

  • Air.
  • Food and drink.
  • Bodily movement and rest.
  • Mental activity and rest.
  • Sleep and wakefulness.
  • Retention and evacuation.

They guide preventive and lifestyle thinking within the system.

Dosage forms

Form General description
Safoof Powder
Joshanda Decoction
Khesanda Infusion/soaked preparation
Habb Pill
Qurs Tablet-like form
Sharbat Syrup-type liquid
Majun Semisolid electuary
Arq Distilled preparation
Roghan Oil preparation

Pharmacognostic role

Identify every material in a single-drug or compound formula, detect substitution and control preparation.

Similar form names across systems do not guarantee identical composition.

Regimenal procedures require trained practice; a syllabus overview is not a procedure guide.

4.21 Siddha medicine: principles, treatment and forms

Siddha is a medical tradition strongly associated with Tamil literature and practice.

Its framework includes five-element concepts and three functional categories commonly called Vali, Azhal and Iyam.

They are also described through related Vatham, Pitham and Kapham terminology.

Basic treatment approach

The system interprets health and disease through the balance of its categories, constitution and related factors.

Diet and conduct are considered along with medicine and procedures.

Diagnosis includes traditional observation and examination methods.

These concepts should be described within the Siddha framework rather than converted into unsupported biomedical diagnoses.

Materials and processing

Formulations may use herbs and, in some preparations, mineral, metal or animal materials.

Selection and processing depend on the formula.

Claims of traditional purification do not eliminate the need to measure potentially harmful constituents, contaminants and product quality.

Representative dosage forms

Chooranam is a powder.

Kudineer is a decoction.

Mathirai is a pill/tablet-like form.

Ilagam/Leghiyam is a semisolid.

Thailam is an oil preparation.

Parpam and Chendooram are specialised processed preparations with composition determined by the particular formula.

External forms include pastes or other specified preparations.

Classification

Siddha teaching commonly recognises 32 types of internal medicines and 32 types of external medicines/therapies.

The syllabus asks for an introduction, so know the broad division and representative forms rather than assuming the number means 32 identical products.

Quality and role of pharmacognosy

Authentication and constituent testing support plant ingredients.

Microscopy can distinguish powders; chemical profiles can assess processed extracts.

For mineral/metal products, botanical tests alone are insufficient: elemental composition and relevant toxicological evaluation are needed.

Product category, route and preparation must be recorded clearly.

4.22 Sowa-Rigpa: introductory principles and forms

Sowa-Rigpa, often associated with Tibetan and Himalayan medical traditions, is included in the Indian AYUSH framework.

It has its own texts, diagnostic approach and pharmaceutical practices and should not be treated as another name for TCM.

Basic conceptual framework

Its traditional theory includes five elements and three principal categories commonly transliterated:

  • rlung: wind.
  • mkhris-pa: bile.
  • bad-kan: phlegm.

Spellings vary in English.

These terms have meanings within the system and are not measurements of modern respiratory air or circulating fluids.

Treatment approach

Traditional management commonly considers diet, behaviour, medicines and external therapies according to the assessed pattern.

Selection accounts for the individual and the interpreted disease state.

Assessment and treatment require the relevant trained practice; the theory alone does not determine an evidence-based treatment for a modern diagnosis.

Medicinal forms

Preparations can include powders, pills, decoctions and other defined compound forms.

Ingredients may be botanical and, in some formulas, mineral or animal derived.

Know the physical dosage form and the declared constituents separately.

A complex pill cannot be identified by appearance alone.

Pharmacognostic concerns

High-altitude supply and common-name variation can complicate botanical identity.

Authenticate the species and part, ensure traceability and assess conservation concerns where relevant.

Extensive processing may limit microscopy, making suitable chemical and other evidence important.

Use the actual formula and analytical requirements rather than a universal test for the entire system.

4.23 Homoeopathy: principles and pharmaceutical forms

Homoeopathy is a medical system whose traditional principles include like cures like, individualised remedy selection and potentisation through serial dilution and succussion or trituration.

These describe the system’s doctrine; they are not established explanations of a dose-dependent molecular treatment effect.

Pharmaceutical preparation terms

A mother tincture is an initial preparation obtained from a specified source by a defined extraction process.

Subsequent preparations may use serial dilution scales.

Trituration is repeated grinding with a carrier under the prescribed method; succussion is a defined shaking process.

These operations are different from a chemical assay or measurement of clinical potency.

Dilution scales

In a decimal scale, each step is commonly 1:10; in a centesimal scale, each step is commonly 1:100.

Theoretical concentration after n steps is:

C = C0/fⁿ

Here f is the dilution factor.

The term potency in this system must not be confused with greater measured molecular concentration.

Worked example: hypothetical dilution

Starting at 1.0 mg/mL, three 1:100 dilution steps give:

1.0/(100³) = 0.000001 mg/mL

Each step lowers the theoretical concentration.

This arithmetic describes dilution only; it does not demonstrate therapeutic benefit.

Very high dilutions may contain no molecules of the original substance in a given portion.

Three theoretical 1:100 dilution stages starting at 1 mg/mL. Each lowers concentration; the diagram describes pharmaceutical dilution arithmetic, not evidence of clinical efficacy.

Diagram labels: Starting concentration 1 mg/mL; each step 1:100. First stage 10^-2 mg/mL; second 10^-4 mg/mL; third 10^-6 mg/mL. Dilution arithmetic does not demonstrate efficacy.

Dosage forms and quality

Forms include liquid preparations, medicated globules/pellets, tablets and some topical products.

Source identity, preparation method, carrier, strength/dilution designation and contamination control matter.

Low-dilution or mother-tincture products may contain pharmacologically active or toxic substances, so all products cannot be assumed chemically inactive or harmless.

Evidence distinction

Reliable evidence does not establish homoeopathy as an effective treatment for health conditions generally.

Manufacturing consistency and a documented dilution process do not prove clinical efficacy.

Pharmacognosy can authenticate plant starting materials, but it cannot validate a therapeutic claim simply by confirming their identity.

4.24 Traditional Chinese Medicine: basic principles and treatment

TCM includes herbal formulations, acupuncture-related practice, dietary approaches, movement practices and other modalities.

Its traditional concepts include Yin-Yang, Qi, Five Phases and Zang-Fu.

These belong to its explanatory framework; they should not be drawn as newly discovered anatomical structures.

Yin-Yang and Qi

Yin and Yang describe complementary relationships and patterns.

Qi refers to a traditional functional/vital concept.

It is not a directly measured chemical substance or the same quantity as energy in a physical equation.

Traditional terminology needs careful interpretation rather than literal biological arrows showing an unverified substance flowing through organs.

Five Phases

Wood, Fire, Earth, Metal and Water form the five-phase framework.

Their generating and controlling relationships are conceptual associations, not a chemical conversion of wood into a human organ.

Use names and relationships accurately if a conceptual chart is drawn.

Pattern differentiation

Treatment is traditionally selected through pattern differentiation, often referred to as identifying a Zheng.

Assessment may include observation, questioning, tongue examination and pulse interpretation.

Common pattern categories include exterior/interior, cold/heat, deficiency/excess and Yin/Yang.

A modern disease label may be considered alongside these, but the classifications are not identical.

Formula organisation

The Jun-Chen-Zuo-Shi framework describes chief, deputy, assistant and envoy roles within a formula.

These roles express traditional intent rather than proof that the ingredients have measured synergistic action.

The actual formula and evidence determine what can be claimed.

Evidence and clinical distinction

Evidence differs among specific TCM interventions and conditions.

A study of a defined acupuncture approach cannot establish the efficacy of all herbal products.

Product identification, contamination, interactions and appropriate clinical monitoring matter.

Explain modalities without giving needle-placement or other invasive procedure instructions.

4.25 TCM dosage forms and processing

Common forms

Tang is a decoction; San a powder; Wan a pill-type preparation.

Gao may describe a paste, concentrated extract or other form depending on the preparation.

Modern products also include granules, capsules and tablets made from defined materials or extracts.

Transliteration alone does not provide the complete manufacturing specification.

Decoction pieces and Paozhi

Medicinal materials may be cleaned, cut and processed into suitable pieces.

Paozhi refers to traditional processing that can involve methods such as heating or treatment with specified adjuncts.

Processing can change extraction and composition.

Any claim that it reduces toxicity must be evaluated for the actual material, process and final product.

Decoction and granule comparison

A decoction extracts the defined combination under controlled conditions.

Extract granules concentrate and dry a defined extract, often with suitable carriers.

The mass of a granule is not automatically equivalent to the same mass of crude herb.

Extraction ratio, carrier and constituent profile must be known.

A defined native extract is dried and processed into granules with any specified carrier. Native-extract mass and finished-granule mass must be distinguished when describing an extraction ratio.

Diagram labels: Native dried extract; forming screen; defined extract; specified process; dry and check granules. Declare any added carrier separately.

Concentration-ratio example: hypothetical

Suppose 50 g of starting material produces 10 g of native dried extract, before carrier addition.

Its ratio is 5:1 by mass.

If 5 g of carrier is then added, there are 15 g of finished granules.

Calling the whole 15 g a 5:1 native extract would obscure the carrier and actual composition.

Quality considerations

Identify each source and part, control the processing steps and examine markers or suitable fingerprints.

Check relevant contaminants and microbial quality.

A batch with the same traditional formula name can still differ in constituents when species, ratios or manufacturing differ.

Comparison across systems

Decoctions, powders, oils and pills occur in several traditions.

Their similar physical form does not make their formulas, theory or clinical evidence identical.

Pharmacognosy helps determine what material is actually present and how the process alters it.

4.26 Role of pharmacognosy in conventional and traditional medicine

In conventional medicine

Natural products can provide chemically defined active drugs, lead structures and starting materials for further development.

Examples include morphine, atropine, digoxin and selected anticancer or antimalarial compounds.

Approval and appropriate use depend on the actual product and evidence, not merely its natural origin.

Drug-development sequence

Authenticate a source, isolate or characterise constituents, test relevant activity, investigate selectivity and toxicity, determine suitable formulation and exposure, and evaluate the candidate appropriately.

A positive laboratory screening result is an early finding, not proof of an effective medicine.

In traditional preparations

Pharmacognosy supports correct species and medicinal part, detection of adulteration, constituent analysis, extraction control, stability assessment and conservation.

Compound formulations require control of each ingredient and of the final mixture.

Authenticity is necessary but does not by itself prove the traditional indication.

Excipients and formulation materials

Starch, gums, mucilage, oils and related natural materials have formulation roles when suitably specified.

They need appropriate purity and functionality tests.

Different grades may behave differently despite sharing a common material name.

Documentation and stewardship

Link source, processing and batch records for traceability.

Protect scarce species through sustainable supply.

Traditional knowledge can guide research; suitable studies establish composition, activity and clinical value.

Patient-facing relevance

State species, part, preparation and amount.

Crude herb, extract, essential oil and isolated compound give different exposures; these details support assessment of dose, interactions and adverse events.

4.27 Quality, safety and evidence: combined interpretation

Different questions

Quality checks identity, composition and purity.

Efficacy asks whether a specific intervention improves a defined outcome.

Safety assesses harms at relevant exposure.

Authenticity alone proves neither efficacy nor suitability.

Class-test example

Positive phenolic and alkaloid reactions do not identify one species or establish therapeutic amounts.

Confirm important findings with selective identity and composition tests.

Dosage-form example

A kwatha and essential oil from one aromatic plant can have different profiles.

Their mass, concentration and route cannot be substituted automatically; heating can alter susceptible constituents.

Interactions and contamination

Assess actual ingredients for medicine interactions, substitution, contaminants and relevant mineral/metal constituents.

Natural origin does not establish safety.

Comparison-answer pattern

State the system’s theory, treatment categories, forms and pharmacognostic role.

Separately explain evidence for the actual intervention; avoid inventing mechanisms or universal claims.

Complete learning chain: Source and part → constituent properties → extraction/process → dosage form → identity and quality tests → evidence and appropriate use.

4.28 Rapid revision and examination practice

Recall checklist

  • Primary/specialised describes metabolic role.
  • Carbohydrates have sugar chemistry; proteins have peptide bonds; many fixed oils are triglycerides.
  • Alkaloid salt formation is useful, with exceptions.
  • Glycosides: glycone + aglycone; classes overlap.
  • Hydrolysable and condensed tannins differ in linkages.
  • Terpenoids: C5-based carbon counts.
  • Volatile oil, fixed oil, gum and resin are distinct.
  • AYUSH and TCM have distinct concepts.
  • Form does not prove composition or efficacy.

Common errors

Avoid calling secondary compounds waste, identifying species by one colour or drawing traditional concepts as anatomy.

Dilution lowers molecular concentration.

Short questions

  • Define metabolite, glycone and aglycone.
  • Compare starch and cellulose.
  • Distinguish fixed and volatile oils.
  • Define oleoresin and oleo-gum-resin.
  • Name five basic Ayurvedic preparations.
  • Explain Mizaj and TCM pattern differentiation.

Long-answer practice

  • Compare primary and secondary metabolites.
  • Explain properties, tests and uses of all ten metabolite classes.
  • Describe volatile-oil recovery with a labelled condenser and vapour path.
  • Explain Ayurveda principles and dosage forms.
  • Compare Unani, Siddha, Sowa-Rigpa, Homoeopathy and TCM principles/forms; outline Yoga and Naturopathy.
  • Explain pharmacognosy in conventional and traditional medicine; distinguish quality and efficacy.

Numerical self-check: hypothetical data

A. Yield: 4 g extract/25 g dry drug = 16%.

B. Marker: 4 g × 1.5/100 = 0.060 g.

C. Carbon count: six C5 units.

Answer: Typical C30 triterpene framework.

D. Dilution: 1 mg/mL after two 1:100 steps.

Answer: 0.0001 mg/mL.

E. Native ratio: 60 g drug to 12 g native extract.

Answer: 5:1, before carrier addition.

Final check

Constituent answers: definition, properties, examples, tests, uses.

System answers: principles, treatment, forms, pharmacognostic role.

Exclusive Student Alerts

Join AKTU VIP Telegram & WhatsApp Group

Get immediate exam updates, syllabus changes, quantum PDFs, and viva questions.

Have Questions or Want to Discuss?

Join the community conversation or ask your queries in the comments.

View Comments & Discussion →
Home Notes Syllabus PYQs Quantum